| Type | Thickness, mm | Width, mm | Steel grades | Standards |
| Coil |
1,5 – 6,0 1,8 – 16,0 |
940 – 1 450 940 – 1 835 |
S235JR; S235J2; S235JR+AR; S355J2+N; S355K2+N; S355J2G3; S355K2G3; 3SP5; S355J2; S275JR; 15HSND; 3SP3; 09G2S; S235J0; 20K; 22К 09G2D; 3SP1; S355-460MLO (NLO) SAPH 370; SPHC; SPHT 1; SPHT 2; SS400 A36; SAE 1005; SAE 1006; SAE 1008; SAE 1010; SAE 1012; SAE 1018; SAE 1015; SAE 1018; SAE 1020; SAE 1021; SAE 1017; SAE 1025; SAE 1026 C; A; CS Type B; HSLAS 50(340) Class 1; SS 36(250) Type 1 |
EN 10025-02:2004; EN 10225; ASTM A560; JIS G3113-06; JIS G3131-10; JIS G3132-11; JIS G3101-2015; ASTM A36/A36M-19; ASTM A568/A568M-19ª; ASTM A36/A36M-19; ASTM A283/283M-18; ASTM A131/A131M-14; ASTM A1018/A1018M-16a |
| Type | Thickness, mm | Width, mm | Steel grades | Standards |
| Coil | 2,5 – 16,0 | 940 – 1 835 |
S235JR; S275JR; S355JR; SAE 1006; SAE 1008; SAE 1010; SAE 1012; SAE 1018; А36 |
EN 10025-2:2019; ASTM A36/A36M-19; ASTM A568/A568M-19ª; ASTM A1011/A1011M-18ª |
| Type | Thickness, mm | Width, mm | Steel grades | Standards |
| Coil | 1,5 – 6,0 | 940 – 1 600 |
S235JR; S235J0; S235J2; S235JRС; S275JR; S275J0; S275J2; S355J2; S355J0; S355JR; S355MC; S315MC; S500MC; A36; CS Type B; DD 11; DD 12; DD 13; DD 14; RSt 37-2; SAE 1006; SAE 1008; SAE 1010; SAE 1015; SAE 1018; SAE 1020; SAE 1025; SG 255; SG 295; SS 33(230); SAPH370, SAPH440 |
EN 10025-02:2004; EN10111:2009; EN 10149:2014; EN 10111-08; ASTM A36/A36M-19; ASTM A1011/A1011M-18ª; ASTM A569/A569M-98 DIN 17100-80; JIS G3116-13; JIS G3113 |
| Type | Thickness, mm | Width, mm | Steel grades | Standards |
| Coil | 0,35 – 3,0 | 600 – 1 600 |
DC01, DC03, DC04, DC05 CS type A, CS type B, DS type B, EDDS SAE 1006, SAE 1008, SAE 1010 SPCC, SPCC-Т DC01EK, DC04EK EK2 HC260LA, HC300LA, HC340LA, HC380LA, HC420LA |
EN 10130:2006 ASTM A1008/A1008M ASTM A568/568M JIS G3141 EN 10209 DIN 1623 EN 10268 |
| Type | Thickness, mm | Width, mm | Steel grades | Standards |
| Coil | 0,35 – 3,0 | 900 – 1 600 |
S220GD; S250GD; S280GD; S320GD; S350GD; S390GD; S420GD; S450GD; S550GD, DX51D; DX52D; DX53D; DX54D; DX56D; DX57D; HCT590X; HCT780X; HCT980X, HX180BD; HX220BD; HX220YD; HX260LAD; HX260YD; HX340LAD; HX420LAD; FS Туре А; FS Туре В; CS Туре А; CS Туре В; CS Туре С; SS 33(230); SS 37(255); SS 40(275); SS 50(340) Class 1; SS 50(340) Class 2; SGCD1; SGCC; SGC340; SGC440 |
EN 10346 ASTM A653/A653M JIS G3302 |
| Type | Thickness, mm | Width, mm | Steel grades | Standards |
| Coil | 0,35 – 1,50 | 900 – 1 600 |
DX51D DX52D, DX53D, DX54D, S250GD, S280GD, S320GD, S350GD, HX250LAD, HX280LAD, HX320LAD |
EN 10169:2018 |
| Type | Thickness, mm | Width, mm | Length, mm* | Standard |
| Slab | 200, 220, 250 | 1 020 – 1 850 | 5 000 – 10 300 | Steel grades according to EN, ASTM, and JIS |
| 315 | 1 720 – 2 000 | 5 000 – 7 800 | ||
| Square billet | 106 | 106 | 10 500 – 12 000 | Steel grades according to EN, ASTM, and JIS |
| 152 | 152 | 4 000 – 12 000 |
| Type | Diameters, mm | Steel grades | Standards |
| Low Carbon Steel Wire for general purpose applications (bright wire) | Ø 0,50 - 10,00 | SAE 1008, SAE 1010 | EN 10218 |
| Low Carbon Steel Wire for general purpose applications (annealed wire) | Ø 0,50 - 10,00 | SAE 1008, SAE 1010 | EN 10218 |
| Low Carbon Steel Wire for garbage binding (annealed rosettes) | Ø 2,50 - 3,80 | SAE 1008, SAE 1010 | EN 10218 |
| Low Carbon Heat-Treated and Non Heat-Treated Galvanized Wire | Ø 0,80 - 10,00 | SAE 1008, SAE 1010 | EN 10244 |
| High Carbon Roping Wire | Ø 0,50 - 4,00 | C60, C70, C80, C85 | EN10264-2, DIN 2078 |
| PC Strand 1x7 | Ø 6,9; Ø 9,3; Ø 12,5; Ø 15,2 | C60, C70, C80, C85 | EN10138-3, BS5896-1980 |
| PC Strand 1x3 | Ø 4,5; Ø 4,9; Ø 6,9 | C60, C70, C80, C85 | EN10138-3 |
with decorative characteristics of real wood, scratches/chips resistant
UV plywood is prefinished panel ready for cutting and milling. It saves time, labor, equipment costs and waste accrue in the furniture and cabinet components production process.
| Standard sizes, mm (ft) | 5×5 (1525×1525); 8×4×8 (2440×1220×2440; 2500×1250×2500); 5×10 (1500/1525×3000/3050) |
| Thickness, mm | 6; 6.5; 8; 9; 10; 12; 15; 18; 19; 21 |
| Surface type | 100% birch plywood with uniform ultra violet (UV) cured finish, UV coating on one or two sides |
| Grade | B/B, B/BB, BB/BB (UV both sides); B/CP, BB/CP (UV one side) |
| Glue type | Interior, Exterior |
| Wood preparation | Special sanded plywood with: Sanding 400 Medium Gloss 35% (±5) coating: 1. UV filler: 35 – 38 gr/m2 2. UV filler: 15 – 18 gr/m2 3. UV Top: 6–10 gr/m2 |
| Lacquer | Transparent, with additional pigment upon customer’s request |
| Gloss level (on request) | UV High – gloss 80% (±5) UV Medium – gloss 35% (±5) UV Light – gloss 20% (±5) UV Special – gloss upon customer’s request (±5) |
light-brown plywood for painting
Paint Kraft can be used for both interior and exterior work, including the decoration of walls and facades, doors and furniture, vehicle bodies, and sports equipment. Paint Kraft allows you to achieve a smooth, durable cover without cracking.
| Standard sizes, mm (ft) | 1220х2440/1250х2500 (4х8) 1500х3000/1525х3050 (5х10) |
| Thickness, mm | 6–21 (thickness up to 40 mm available upon client request) |
| Surface color | light brown |
| Surface type | smooth/smooth (F/F) |
| Film density, g/m² | 214 |
| Formaldehyde emission class | Е1 |
| Water resistance | high |
| Density, kg/m² | 640-700 |
| Moisture content, % | ≤14 |
| Edge sealing | painted on request |
high-quality construction material with excellent durability and a good-looking surface
Regular Interior plywood is easy to work with, and goes perfectly well with finish materials. It is water resistant, however it is not recommended for use with exterior finishes. This material is ideal for interior use and the manufacturing of furniture parts and toys
for flooring in light commercial vehicles and other applications where slip resistance, easy care and decorative flooring are needed
100% birch plywood coated with film imprinted with hexagonal pattern is produced
with two main colors: Dark Brown (Hexa Dark Brown) and Black (Hexa Black). The
following colors are also available upon client request: Light Grey (Hexa Light Grey),
Stone Grey (Hexa Stone Grey).
Hexa meets the requirements for LCV: high class of anti-slip properties (R10
according to DIN 51130), high level of resistance to surface wear (350-600 rotations
according to EN 438-2:2016) and surface with hexagonal and symmetric pattern is
easy for cleaning and installation.
| Standard sizes, mm (ft) | 1500x3000/1525x3050 (5x10) 1220х2400/1250х2500 2440х1200/2500х1250 |
| Thickness, mm | 12-30 (thickness up to 40 mm available upon client request) |
| Surface color | Dark Brown, Black, Light Grey, Stone Grey |
| Surface type | hexa/smooth (H/F) |
| Film density, g/m² | Dark Brown (220 g/m2) Black (220 g/ m2) Light Grey (220 g/m2) Stone Grey (174 g/m2) |
| Wear resistance of the film, cycles in Taber abrasion test | 350-600 |
| Glue type | exterior (WBP) |
| Formaldehyde emission class | Е1, Е0,5, E0,05pp, CARB |
| Slip resistance | R10 (according to DIN 51130 ramp-test) |
| Density, kg/m² | 640-700 |
| Moisture content, % | 5-12 |
undirectional plywood for bed slats
Unidirectional plywood throughout 2 times higher bending strength than solid wood.
Birch plywood can be made to the customer’s specifications for thickness, number of plies, and tolerances. The length of a birch plywood sheet is measured along the grain of the face and back veneers.
| Standard sizes, mm (ft) | 1525х1525 (5х5); 2440х1220; 2550х1250 (8х4) Cut to size on request |
| Thickness, mm | 8,9,10,12,15, 18 mm |
| Grade | ВВ/ВВ, ВВ/СР, СР/СР |
| Glue type | 5х5 MR/Interior; WBP (Exterior) on request 8х4 extra waterproof WBP (Exterior), MR (Interior) on request |
| Formaldehyde emission class | Е1, Е0,5, E0,05 ppm CARB & EPA on request |
| Moisture content, % | 5-12% |
| Composition | All plies arranged in the same direction |
for furniture components
No further cutting is needed to remove strength-reducing defects. Unlike in solid wood, knots do not compromise the strength of the sheet.
Birch plywood can be made to the customer’s specifications for sizes and tolerances. S2S plywood can have its face veneer sanded down to the adhesive layer.
| Standard sizes, mm (ft) | 2440х1220 и 2550х1250 (8х4) |
| Thickness, mm | 15, 18, 21, 24, 25, 27, 30, 38, 40 mm |
| Grade | С/С |
| Glue type | Extra waterproof WBP (Exterior) |
| Formaldehyde emission class | Е1, Е0,5, E0,05 ppm CARB & EPA on request |
| Moisture content, % | 5-12% |
| Composition | Regular product: Two cross plies. Unidirectional plywood throughout available on request |
for flooring in commercial vehicles
Abrasive coating provides human safety, the preservation of goods and durability of flooring in commercial vehicles. Titan is coated with a unique film containing corundum particles, which allow exceptional anti-slip properties and wear resistance. Titan has the highest level of durability and is also resistant to the loading of roller wheels.
Possible production according to the client's specifications, as well as edge and surface sealing on the CNC machine.
| Standard sizes, mm (ft) | 2440х1220х2440/2500х1250х2500 (8х4х8) 1500х3000/1525х3050 (5х10) |
| Thickness, mm | 6–30 (thickness up to 40 mm available upon client request) |
| Surface color | black (W)/black, dark brown (F) |
| Surface type | wiremesh/smooth (W/F) |
| Film density, g/m² | black (125 g/m2)/dark brown (120 g/m2) |
| Wear resistance of the film, cycles in Taber abrasion test | more than 2 600 rotations |
| Formaldehyde emission class | Е1 |
| Water resistance | high |
| Density, kg/m² | 640-700 |
| Moisture content, % | ≤14 |
| Edge sealing | painted on request |
plywood with a smooth sanded surface for HPL panels production
Perfect to be used in panels for kitchens, toilets and showers.
for cargo containment systems for LNG transportation and storage (by KOGAS and GTT)
The plywood demonstrates high strength and long-time stability, even in extreme temperatures up to -196°C (Gas NO96 and Gas NO96 L03 & L03+ up to -160°C).
| GAS КС-1 | for КС-1 systems by KOGAS, certified by Korean Register |
| Gas Mark-III | for Mark III systems GTT, produced in compliance with GTT M3010 standard, certified by GTT, Bureau Veritas, Lloyd's Register |
| Gas NO96, Gas NO96 L03&L03+ | for NO96 and NO96 L03&L03+ systems by GTT, produced in compliance with GTT M3502 standard, certified by GTT, ABS, DNV, Lloyd's, Bureau Veritas |
multi purpose birch plywood for concrete work, with 2-5 reuse times
The edges of Oil are protected from moisture with acrylic paint. The surface is coated with oil for ease of use. Oiling is executed in controlled conditions that guarantee smooth application. The product is suited for low-rise construction.
| Standard sizes, mm (ft) | 2440×1220 (8×4), 2500×1250 (8×4), 1500×750 |
| Thickness, mm | 18, 21 |
| Surface type | Not sanded |
| Film density, g/m² | > 450 |
| Glue type | Exterior (WBP) |
| Formaldehyde emission class | Е1 |
| Density, kg/m² | 640-700 |
| Moisture content, % | 5-14 |
| Edge sealing | Acrylic paint. If panels are cut or drilled on site, edges and holes must be protected with acrylic paint. |
high durability and moisture resistance
Regular Exterior maintains its performance characteristics under conditions of high humidity and does not deform or soak. It can be used in both interior and exterior finish.
| Standard sizes, mm (ft) | 1525х1525 (5х5) 1220х2440х1220 (4х8х4) 1250х2500х1250 (4х8х4) 1500/1525x2440/2500 (5x8) 2440/2500х1500/1525 (8x5) 1500/1525х3000/3050 (5х10) |
| Thickness, mm | 4-40 |
| Surface type | Outer layers sanded (S2S), one side sanded (S1S), unsanded(NS) |
| Grade | I (B, S), II (BB), III (CP), IV (C) |
| Formaldehyde emission class | Е1 |
| Water resistance | high |
| Density, kg/m² | 640-700 |
| Moisture content, % | 5-14 |
for furniture component production - circular saw cutting, milling and machining the edges
Extra control of the bonding strength makes it ideal for creating dove-tail joints. Thicker face veneers ensure the best surface for sanding and coating. Drawer ensures the most natural surface look.“
| Standard sizes, mm (ft) | 1525х1525 (5х5) 1220х1525 (4х5)/1250х1525 (4х5) 1525х1250 (5х4)/1525х1250 (5х4) |
| Thickness, mm | 5–15 (special thicknesses available upon customer's request) |
| Grade | DR B/B, DR B/BB, DR BB/BB, DR B/CP, DR BB/CP, DR CP/CP |
| Glue type | Interior light glue (INT) |
| Formaldehyde emission class | Е1 |
| Density, kg/m² | 640-700 |
| Moisture content, % | ≤10 |
undirectional plywood for door frames and furniture
Waterproof glue. Very tight thickness tolerance1.5 times stronger bond of long plies compared to regular plywood.
| Standard sizes, mm (ft) | 2440×1220×2440; 2500×1250×2500 (8×4×8) |
| Thickness, mm | 15; 18; 21; 24; 25; 27; 30; 38; 40 |
| Surface type | The surface is prepared for finishing with wood veneers, laminates, or plastic film. All visible defects on the BB face are filled before sanding. Excess filler on the surface after the sanding is not permitted. |
| Grade | BB/CP |
| Glue type | WBP (Exterior) |
| Composition | Two cross plies. Inner plies arranged in accordance with the customer’s specifications. |
for furniture carcasses, upholstery, flooring and wall paneling
Made of hot pressed birch chip mixed with bonding materials. A fine-structured surface ensures perfect decorative properties of the board. Due to the high density of the boards the products can be assembled/disassembled up to 7 times
| Standard sizes, mm (ft) | 3500х1750 |
| Thickness, mm | 16, 18 (on demand) |
| Formaldehyde emission class | Е1 (up to 8 mg per 100 g of absolutely dry board) |
| Density, kg/m² | 779-800 |
| Moisture content, % | 5–13 |